|
PUMP PP60

DIAPHRAGM PUMP PP60
Description and technical features
The diaphragm pump P-60 is available in the field and orchard version. The different versions differ in the following features:
- the pump marked PS60 is an orchard pump with a shaft equipped with two splined endings to transmit the drive to the fan attachment,
- the pump marked PP60 is a pump for field sprayers with one splined ending of the shaft.
It can be used for working with plant protection products and liquid mineral fertilisers admitted for trade in Poland. For other purposes the pump can be used only after consultation with the manufacturer, under pain of losing the warranty. It is a diaphragm-piston pump, slider, on rolling bearings (shaft in the casing) and slide bearings (crank bearing). It is made of aluminium alloys, of plastic and good grades of steel, therefore it is resistant to corrosive effects of plant protection products and liquid mineral fertilisers.

Technical data
Specification
|
Units
|
Value
|
Capacity at 540 rpm suction spout f 40 mm
at the pressure 0,1 MPa
at the pressure 1,5 MPa
|
l/min.
|
60
55
|
Maximum working pressure
|
MPa
|
1,5
|
Direction of rotation of the pump shaft
|
|
any
|
Rotational speed of the pump shaft
|
rpm
|
540
|
Power consumption
at the pressure 0,5 MPa
at the pressure 1,5 MPa
|
kW
kW
|
1,0
2,5
|
Amount of oil
|
l
|
0,22
|
Oil grade
|
-
|
Hipol GL-4 80 W/90 ZN-92/MPandH/NF-201
|
Weight
|
kg
|
16,6
|
Dimensions:
length (with cover WOM)
height
|
mm
mm
mm
|
310
300
275
|
Diameter of the suction spout
|
mm
|
42
|
Diameter of the fuel discharge port
|
mm
|
36
|
End of the pump roller
- type
- nominal diameter
- number of splines
|
-
mm
pcs
|
1 according to PN-86/R-36101
35
6
|
|
|
|